Original price was: $15.95.$11.17Current price is: $11.17.
- Streamlined service, designed for your convenience.
- Buy with Confidence, Get Quality
- The best quality products, always.
- Online assistance, always at your service.
The FIXE Traditional Anchor is designed for any type of route. When placed in good rock, the anchor simultaneously loads both bolt placements. The design locates the anchor bolts in a vertical orientation. This will eliminate the “Shock Load” possibility if one anchor bolt were to fail. This design is far superior to anchors that locate the anchor bolts across a horizontal plane.
Fixe does not recommend outdoor use of this anchor. If you choose to use plated steel outdoors, use only in arid and low-corrosive environments.
WARNING for California customers: Cancer and reproductive harm. For more info please visit www.p65warnings.ca.gov
- Rounded inner edge for less wear on carabiners
- Optimized surface area contact with the rock
- Made in Barcelona, Spain
- Geometry: When placed on a roof, the carabiner will be routed so that it never comes into contact with the projecting head of the bolt anchor.
- Conical Washer: The rim of the bolt anchor hole protrudes slightly into a conical shape, away from the wall. The act of pulling the bolt anchor will generate a spring effect that provides constant pressure against the wall, multiplying the strength of the torque. It also provides more consistency when torque tightening the bolt.
- Anti-rotation Pins: Textures on the hanger help to reduce the likelihood of the hanger spinning.
- Ecotri zinc plated steel (Replacing bichromate steel): Perfect for equipping indoor sport facilities such as gyms and climbing walls. Its manufacturing process is characterized by low emission of residues and increasing its resistance to corrosion. 8 microns of zinc coating (free of chromium-6) is applied and finished with an organic seal. With three treatments a higher resistance to corrosion is achieved (96h white corrosion + 360h red corrosion) and the resistance to thermal shock (200ºC) is also incorporated.
- Lighter: With a thickness of 3.5mm (previously 4mm) Fixe has reduced the weight of the hanger by 12.5% while still being one of the most robust hangers on the market.
- Fixe does not recommend for outdoor use: If you choose to use plated steel outdoors, use only in arid and low corrosive environments.
| Brand: | Fixe Hardware |
|---|---|
| Mfg Sku/Part Number: | TAPS-1/2 |
| Rating: | 4950 lbs / 22kn CE/UIAA Certified |
| Material: | Ecotri zinc plated steel3.5mm Stock (hanger)10mm Stock (ring) |
| Dimensions: | 1/2-inch / 12.8mm bolt hole |
Be the first to review “PS 1/2 Traditional Anchor”
Related products
Protection & Hardware
Protection & Hardware
Belay & Rappel Devices
Bolts & Hangers
Protection & Hardware
Passive Pro - Nuts
Ascenders
Active Pro - Cams
Reviews
There are no reviews yet.